1 3

Foxboro FBM216 P0922VV Communication Redundant Input Interface Module

Foxboro FBM216 P0922VV Communication Redundant Input Interface Module

  • Manufacturer: Foxboro

  • Product No.: FBM216

  • Condition:1000 in stock

  • Product Type: Communication Redundant Input Interface Module

  • Product Origin: USA

  • Payment: T/T, Western Union

  • Weight: 1000g

  • Shipping port: Xiamen

  • Warranty: 12 months

  • 24/7 Support
  • 30-Day Returns
  • Fast Shipping

 

General Information

  • Manufacturer: Foxboro

  • Model/Part Number: FBM216 P0922VV

  • Description: Communication Redundant Input Interface Module

Overview

The FBM216 HART Communication Redundant Input Interface Module contains eight group-isolated input channels. It supports a mix of standard 4-20 mA and HART devices.

Functional Specifications

Field Device Channels

Parameter Specification
Version Supported HART Protocol v6
Interface 8 group-isolated channels
Communication to Device Point-to-point, master/slave, asynchronous, half-duplex, 1200 baud
Error Checking Parity on each byte, one CRC check byte
Speed 2 messages per second
Fastest Allowed ECB Block Period 500 ms
Max Distance (FBM216 to Field Device) Up to 3030 m (10,000 ft) (HART FSK physical layer spec)
Compliance Voltage 18 V DC minimum at 20.5 mA
Sense Resistor 61.9 Ω nominal
Total Input Resistance 280 Ω minimum
Analog Accuracy ±0.075% of full scale
Temperature Coefficient 50 PPM/°C
Resolution 15 bits
Update Rate 100 ms
Integration Time 500 ms
Common Mode Rejection >100 dB at 50/60 Hz
Normal Mode Rejection >35 dB at 50/60 Hz
Loop Power Supply Protection Galvanically group isolated, current limited, voltage regulated
Max Loop Resistance 280 Ω (excluding field device)
FBM Input Impedance 280 Ω minimum
FBM Internal Power 24 V DC ±10% (common power supply for all channels)
Isolation Optical & transformer isolation between module logic and ground

Fieldbus Communication

Parameter Specification
Communication Protocol Redundant 2 Mbps module Fieldbus

Power Requirements

Parameter Specification
Input Voltage Range 24 V DC ±5%
Consumption 7 W (maximum)
Heat Dissipation 4 W (maximum)

Regulatory Compliance

Standard Specification
EMC Compliance EN 50081-2, EN 50082-2, EN 61326 (Annex A)
ESD Immunity IEC 61000-4-2 (4 kV contact, 8 kV air)
Radiated Field Immunity IEC 61000-4-3 (10 V/m, 80-1000 MHz)
Electrical Fast Transient/Burst Immunity IEC 61000-4-4 (2 kV on I/O, DC power, and communication lines)
Surge Immunity IEC 61000-4-5 (2 kV on AC/DC power lines, 1 kV on I/O and communication lines)
Conducted Disturbances Immunity IEC 61000-4-6 (10 V RMS, 150 kHz - 80 MHz)
Power Frequency Magnetic Field Immunity IEC 61000-4-8 (30 A/m at 50/60 Hz)
Product Safety UL/UL-C listed for Class I, Div 2, Groups A-D
ATEX Certification EEx nA IIC T4 for Zone 2 environments

Calibration Requirements

Calibration is not required.

Environmental Specifications

Operating Conditions

Parameter Specification
Module Temperature Range -20 to +70°C (-4 to +158°F)
Termination Assembly Temperature Range PVC: -20 to +50°C (-4 to +122°F)  PA: -20 to +70°C (-4 to +158°F)
Relative Humidity 5% to 95% (non-condensing)
Altitude -300 to +3,000 m (-1,000 to +10,000 ft)

Storage Conditions

Parameter Specification
Temperature Range -40 to +70°C (-40 to +158°F)
Relative Humidity 5% to 95% (non-condensing)
Altitude -300 to +12,000 m (-1,000 to +40,000 ft)

Contamination & Vibration

Parameter Specification
Contamination Suitable for Class G3 (Harsh) environments
Vibration 7.5 m/S² (0.75 g) from 5 to 500 Hz

Physical Specifications

Mounting

Component Mounting
Module Mounts on modular baseplate (DIN rail or 19-inch rack)
Termination Assembly DIN rail mounting (32 mm or 35 mm styles)

Weight

Component Weight
Module 284 g (10 oz)
Termination Assembly (Compression Type) 181 g (0.40 lb)
Termination Assembly (Ring Lug Type) 249 g (0.55 lb)

Dimensions

Component Height Width Depth
Module 102 mm (4 in) (114 mm with mounting lugs) 45 mm (1.75 in) 104 mm (4.11 in)
Termination Assembly See product documentation

Termination Cables

Parameter Specification
Cable Lengths Up to 30 m (98 ft)
Materials Polyurethane or Hypalon®/XLP
Termination Type 25-pin male D-subminiature
Cable Type Type 1

Construction – Termination Assembly

Material Specification
PVC Compression
PA Compression
PVC (Ring Lug) Compression
Family Group Color Green (communication)
Terminal Blocks 3 tiers, 8 positions

Field Termination Connections

Type Accepted Wire Sizes
Compression Type 0.2 to 4 mm² (solid/stranded), 0.2 to 2.5 mm² (stranded with ferrules), 24 to 12 AWG
Ring Lug Type #6 size connectors (0.375 in / 9.5 mm), 0.5 to 4 mm² (22 to 12 AWG)

 

View full details

Product Description

 

General Information

  • Manufacturer: Foxboro

  • Model/Part Number: FBM216 P0922VV

  • Description: Communication Redundant Input Interface Module

Overview

The FBM216 HART Communication Redundant Input Interface Module contains eight group-isolated input channels. It supports a mix of standard 4-20 mA and HART devices.

Functional Specifications

Field Device Channels

Parameter Specification
Version Supported HART Protocol v6
Interface 8 group-isolated channels
Communication to Device Point-to-point, master/slave, asynchronous, half-duplex, 1200 baud
Error Checking Parity on each byte, one CRC check byte
Speed 2 messages per second
Fastest Allowed ECB Block Period 500 ms
Max Distance (FBM216 to Field Device) Up to 3030 m (10,000 ft) (HART FSK physical layer spec)
Compliance Voltage 18 V DC minimum at 20.5 mA
Sense Resistor 61.9 Ω nominal
Total Input Resistance 280 Ω minimum
Analog Accuracy ±0.075% of full scale
Temperature Coefficient 50 PPM/°C
Resolution 15 bits
Update Rate 100 ms
Integration Time 500 ms
Common Mode Rejection >100 dB at 50/60 Hz
Normal Mode Rejection >35 dB at 50/60 Hz
Loop Power Supply Protection Galvanically group isolated, current limited, voltage regulated
Max Loop Resistance 280 Ω (excluding field device)
FBM Input Impedance 280 Ω minimum
FBM Internal Power 24 V DC ±10% (common power supply for all channels)
Isolation Optical & transformer isolation between module logic and ground

Fieldbus Communication

Parameter Specification
Communication Protocol Redundant 2 Mbps module Fieldbus

Power Requirements

Parameter Specification
Input Voltage Range 24 V DC ±5%
Consumption 7 W (maximum)
Heat Dissipation 4 W (maximum)

Regulatory Compliance

Standard Specification
EMC Compliance EN 50081-2, EN 50082-2, EN 61326 (Annex A)
ESD Immunity IEC 61000-4-2 (4 kV contact, 8 kV air)
Radiated Field Immunity IEC 61000-4-3 (10 V/m, 80-1000 MHz)
Electrical Fast Transient/Burst Immunity IEC 61000-4-4 (2 kV on I/O, DC power, and communication lines)
Surge Immunity IEC 61000-4-5 (2 kV on AC/DC power lines, 1 kV on I/O and communication lines)
Conducted Disturbances Immunity IEC 61000-4-6 (10 V RMS, 150 kHz - 80 MHz)
Power Frequency Magnetic Field Immunity IEC 61000-4-8 (30 A/m at 50/60 Hz)
Product Safety UL/UL-C listed for Class I, Div 2, Groups A-D
ATEX Certification EEx nA IIC T4 for Zone 2 environments

Calibration Requirements

Calibration is not required.

Environmental Specifications

Operating Conditions

Parameter Specification
Module Temperature Range -20 to +70°C (-4 to +158°F)
Termination Assembly Temperature Range PVC: -20 to +50°C (-4 to +122°F)  PA: -20 to +70°C (-4 to +158°F)
Relative Humidity 5% to 95% (non-condensing)
Altitude -300 to +3,000 m (-1,000 to +10,000 ft)

Storage Conditions

Parameter Specification
Temperature Range -40 to +70°C (-40 to +158°F)
Relative Humidity 5% to 95% (non-condensing)
Altitude -300 to +12,000 m (-1,000 to +40,000 ft)

Contamination & Vibration

Parameter Specification
Contamination Suitable for Class G3 (Harsh) environments
Vibration 7.5 m/S² (0.75 g) from 5 to 500 Hz

Physical Specifications

Mounting

Component Mounting
Module Mounts on modular baseplate (DIN rail or 19-inch rack)
Termination Assembly DIN rail mounting (32 mm or 35 mm styles)

Weight

Component Weight
Module 284 g (10 oz)
Termination Assembly (Compression Type) 181 g (0.40 lb)
Termination Assembly (Ring Lug Type) 249 g (0.55 lb)

Dimensions

Component Height Width Depth
Module 102 mm (4 in) (114 mm with mounting lugs) 45 mm (1.75 in) 104 mm (4.11 in)
Termination Assembly See product documentation

Termination Cables

Parameter Specification
Cable Lengths Up to 30 m (98 ft)
Materials Polyurethane or Hypalon®/XLP
Termination Type 25-pin male D-subminiature
Cable Type Type 1

Construction – Termination Assembly

Material Specification
PVC Compression
PA Compression
PVC (Ring Lug) Compression
Family Group Color Green (communication)
Terminal Blocks 3 tiers, 8 positions

Field Termination Connections

Type Accepted Wire Sizes
Compression Type 0.2 to 4 mm² (solid/stranded), 0.2 to 2.5 mm² (stranded with ferrules), 24 to 12 AWG
Ring Lug Type #6 size connectors (0.375 in / 9.5 mm), 0.5 to 4 mm² (22 to 12 AWG)

 

Download PDF file here:

Click to Download PDF

Tags: