
Product Description
General Information
-
Manufacturer: Bently Nevada
-
Series: 9200
-
Model/Part Number: 9200-03-01-05-00
-
Model Type: Two-wire Transducer
Description
The 9200 is a two-wire transducer suitable for continuous monitoring or periodic measurements when used in conjunction with test or diagnostic instruments. When ordered with the integral cable option, the 9200 offers excellent resistance to corrosive environments without the need for additional protection.
Ordering Information
Two-wire Transducer:
Part Number | Description |
---|---|
9200-AA-BB-CC-DD | Configuration options for the 9200 transducer |
Options:
-
A: Transducer Mounting Angle/Minimum Operating Frequency Option
-
01 → 0 ±2.5, 4.5 Hz (270 cpm)
-
02 → 45 ±2.5, 4.5 Hz (270 cpm)
-
03 → 90 ±2.5, 4.5 Hz (270 cpm)
-
06 → 0 ±100, 10 Hz (600 cpm)
-
09 → 0 ±180, 15 Hz (900 cpm)
-
B: Connector/Cable Option
-
10 → 10 feet (3.0 meter)
-
15 → 15 feet (4.6 meter)
-
22 → 22 feet (6.7 meter)
-
32 → 32 feet (9.8 meter)
-
50 → 50 feet (15.2 meter)
-
01 → Top Mount (no cable)
-
02 → Side Mount (no cable)
-
05 → Terminal block top mount (no cable)
-
10 to 50 → Integral hardline cable (length options in feet)
-
C: Mounting Base Option
-
01 → Circular; 1/4-20 UNC stud
-
02 → Circular; 1/4-28 UNF stud
-
03 → Rectangular flange
-
04 → Circular; with three 8-32 threaded studs on a 44 mm (1.75 in) diameter bolt circle
-
05 → No base; 1/2-20 UNF-3A stud
-
06 → Isolated circular 1/4-20 UNC stud
-
07 → Isolated circular 1/4-28 UNF stud
-
08 → Isolated rectangular flange
-
09 → Isolated circular 5/8-18 UNF stud
-
10 → Circular; M10X1 stud
-
11 → Isolated circular M10X1 stud
-
12 → Isolated circular 1/2-20 UNF-2A
-
D: Agency Approval Option
-
00 → No Approvals
-
01 → CSA
-
04 → ATEX/IECEx