Product Description
Product Details
- Manufacturer: Allen-Bradley
- Model/Part Number: 1769-IQ6XOW4
- Model Type: CompactLogix 10 Pt 24V DC D/I Relay D/O Module
Technical Specifications - Allen-Bradley 1769-IQ6XOW4
General Specifications
| Attribute | Value |
|---|---|
| Dimensions |
118 mm (H) x 87 mm (D) x 35 mm (W) (4.65 in. x 3.43 in. x 1.38 in.) Height including mounting tabs is 138 mm (5.43 in.) |
| Approximate Shipping Weight | 280 g (0.61 lbs.) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Operating Temperature | 0°C to +60°C (32°F to +140°F) |
| Operating Humidity | 5% to 95% non-condensing |
| Operating Altitude | 2000 meters (6561 feet) |
| Vibration (Operating) | 10 to 500 Hz, 5G, 0.030 inches maximum peak-to-peak |
| Relay Operation | 2G |
| Shock (Operating) | 30G panel mounted (20G DIN rail mounted) |
| Relay Operation | 7.5G panel mounted (5G DIN rail mounted) |
| Non-Operating Shock | 40G panel mounted (30G DIN rail mounted) |
| Agency Certifications | C-UL certified (under CSA C22.2 No. 142), UL 508 listed, CE, and C-Tick compliant |
| Hazardous Environment Class | Class I, Division 2 Hazardous Location, Groups A, B, C, D |
| Radiated and Conducted Emissions | EN50081-2 Class A |
| Electrical / EMC Compliance |
ESD Immunity (IEC61000-4-2): 4kV contact, 8kV air, 4kV indirect Radiated Immunity (IEC61000-4-3): 10 V/m, 80 to 1000 MHz Fast Transient Burst (IEC61000-4-4): 2 kV, 5 kHz Surge Immunity (IEC61000-4-5): 2 kV common mode, 1 kV differential mode Conducted Immunity (IEC61000-4-6): 10V, 0.15 to 80 MHz |
Input Specifications
| Attribute | Value |
|---|---|
| Voltage Category | 24V DC (sink/source) |
| Operating Voltage Range |
10 to 30V DC at 30°C (86°F) 10 to 26.4V DC at 60°C (140°F) |
| Number of Inputs | 6 |
| Signal Delay (Max.) |
On Delay: 8.0 ms Off Delay: 8.0 ms |
| Off-State Voltage (Max.) | 5V DC |
| Off-State Current (Max.) | 1.5 mA |
| On-State Voltage (Min.) | 10V DC |
| On-State Current (Min.) | 2.0 mA |
| Inrush Current (Max.) | 250 mA |
| Nominal Impedance | 3K Ω |
| IEC Input Compatibility | Type 3 |
Output Specifications
| Attribute | Value |
|---|---|
| Voltage Category | AC/DC normally open relay |
| Operating Voltage Range |
5 to 265V AC 5 to 125V DC |
| Number of Outputs | 4 |
| Signal Delay (Max.) |
Turn-on: 10 ms Turn-off: 10 ms |
| Off-State Leakage (Max.) | 0 mA |
| On-State Current (Min.) | 10 mA at 5V DC |
| Continuous Current per Point (Max.) | 2.5A |
| Continuous Current per Common (Max.) | 8A |
Power & Isolation
| Attribute | Value |
|---|---|
| Bus Current Draw (Max.) |
105 mA at 5V DC (0.525W) 50 mA at 24V DC (1.200W) |
| Heat Dissipation | 2.75W |
| Power Supply Distance Rating | 8 (No more than 8 modules away from the power supply or controller.) |
| Isolated Groups |
Group 1: Inputs 0 to 5 (sink/source configuration) Group 2: Outputs 0 to 3 |
| Input Group to Bus Isolation | 1200V AC for 1 sec. or 1697V DC for 1 sec. |
| Output Group to Bus Isolation | 1836V AC for 1 sec. or 2596V DC for 1 sec. |
| Input to Output Isolation | 1836V AC for 1 sec. or 2596V DC for 1 sec. |