ALLEN BRADLEY 1444-TSCX02-02RB Tachometer Signal Conditioner Expansion Module

Manufacturer

Allen-Bradley

Model/Part Number

1444-TSCX02-02RB

Description

Tachometer Signal Conditioner Expansion Module

Number of Inputs

2

Supported Sensor Types

Voltage signals, Eddy current probe systems, TTL, NPN proximity switch, PNP proximity switch, Self-generating magnetic sensors

Transducer Positive Power

Voltage regulated: 24V/25 mA

Transducer Negative Power

Voltage regulated: -24V/25 mA

Voltage Range

±24V

Isolation

Non-isolated, single-ended analog inputs. Connected sensors have their signal return isolated from the ground

Impedance

>100 kΩ

Protection

Reverse polarity

Analog to Digital Converter

10 bits

Number of BNC Connectors

2

Function

Raw signal output

Distance

Limited to wire lengths of 3 m (9.84 ft)

Impedance

680 Ω output impedance, 1.5k Ω return resistance for ESD protection

EMC Protection

ESD/EFT

Short Circuit Protection

Yes

Drive Current

±4 mA

Noise

Negligible noise due to 1.5k Ω return resistor

Number of Terminal Pin Connectors

4

Function

Conditioned 1/REV and N/REV signal output

Distance

Wire lengths up to 30 m (98.43 ft)

Impedance

100 Ω

EMC Protection

ESD/EFT/Conducted Immunity

Short Circuit Protection

Yes

Drive Current

5 mA per output

Connection

Integral, via ribbon connector

Type

Opto-isolated open-collector

Signal Types

TTL speed (once-per-rev), Tach channel status

Capacity

Can serve six dynamic measurement modules (minimum)

Power

5V DC, 5 mA max per output

Status Indicators (4)

Power, Channel status (2), Local bus status

Current

128 mA @ 24V (174…104 mA @ 18…32V)

Power Consumption

4 W

Power Dissipation

3 W

Isolation Voltage

50V (continuous), basic insulation type between signal ports and AUX bus. No isolation between individual signal ports.

Type Tested

707V DC for 60 s

EFT/B Immunity

IEC 61000-4-4: ±2 kV at 5 kHz on shielded signal ports

Surge Transient Immunity

IEC 61000-4-5: ±2 kV line-earth (CM) on shielded signal ports

Required Terminal Base

1444-TB-B

Removable Plug Connector Sets

Module:  Spring: 1444-TSC-RPC-SPR-01  Screw: 1444-TSC-RPC-SCW-01  Terminal Base:  Spring: 1444-TBB-RPC-SPR-01  Screw: 1444-TBB-RPC-SCW-01

Dimensions (H x W x D), approx.

153.8 x 54.2 x 74.5 mm (6.06 x 2.13 x 2.93 in.)

157.9 x 54.7 x 100.4 mm (6.22 x 2.15 x 3.95 in.)

Weight, approx.

160 g (0.35 lb)

270 g (0.60 lb)