3BSE038415R1 | ABB AO810V2 Analog Output Module

Product Details for AO810/AO810V2 Analog Output Module

General Information

• Article Number: 3BSE038415R1
• Type: Analog Output
• Signal Specification: 0...20 mA, 4...20 mA
• Number of Channels: 8
• HART: No
• SOE: No
• Redundancy: No
• High Integrity: No
• Intrinsic Safety: No
• Mechanics: S800

Features and Benefits

• Channel Capacity: 8 unipolar analog output channels (0...20 mA, 4...20 mA).
• Diagnostics:
  • Communication to D/A converters is supervised via readback verification.
  • Open-circuit diagnostic and cyclic self-diagnostics included.
  • Reports channel errors if the output current is below the set value (>1 mA).
• Output Protection:
  • Short-circuit secured to ZP or +24 V.
  • OSP (Output Set Point) sets outputs to a predetermined state upon error detection.
• Compatibility: Matches MTU models TU810, TU812, TU814, TU830, TU833.

Detailed Data

• Resolution: 14-bit
• Isolation: Groupwise isolated from ground
• Output Load:
  • ≤ 500 Ω (supply connected to L1+ only)
  • 250 - 850 Ω (supply connected to L2+ only)
• Accuracy:
  • Max 0.1% error (0 - 500 Ω load).
• Temperature Drift: Typical 30 ppm/°C, Max 60 ppm/°C
• Rise Time: 0.35 ms (PL = 500 Ω)
• Update Cycle Time: ≤ 2 ms
• Current Limiting: Short-circuit proof, current-limited output
• Maximum Cable Length: 600 meters (656 yards)
• Rated Insulation Voltage: 50 V
• Dielectric Test Voltage: 500 V a.c.
• Power Dissipation: 2.3 W

Diagnostics and Indicators

• Front LEDs:
  • F: Fault
  • R: Run
  • W: Warning
  • OSP: Output Set Point
• Supervision:
  • Module Error: Low output power
  • Channel Error: Open circuit (>1 mA current)
  • Status indication includes: Module Error, Warning, and Channel Error

Environmental and Certification

• CE Mark: Yes
• Electrical Safety:
  • EN 61010-1, UL 61010-1
  • EN 61010-2-201, UL 61010-2-201
• Hazardous Locations:
  • C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2
• Marine Certifications: ABS, BV, DNV, LR
• Operating Temperature: 0 to +55 °C (+32 to +131 °F)
• Storage Temperature: -40 to +70 °C (-40 to +158 °F)
• Pollution Degree: Degree 2 (IEC 60664-1)
• Corrosion Protection: ISA-S71.04: G3
• Relative Humidity: 5 to 95%, non-condensing
• Protection Class: IP20 (IEC 60529)
• EMC Compliance: EN 61000-6-4, EN 61000-6-2
• RoHS Compliance: DIRECTIVE/2011/65/EU (EN 50581:2012)
• WEEE Compliance: DIRECTIVE/2012/19/EU

Compatibility

• MTU Models: TU810, TU812, TU814, TU830, TU833
• Keying Code: AE

Physical Dimensions

• Width: 45 mm (1.77”)
• Depth:
  • 102 mm (4.01”)
  • 111 mm (4.37”) including connector
• Height: 119 mm (4.7”)
• Weight: 0.18 kg (0.4 lbs.)